Waymarker 360 – 12v Copper Bezel & Aluminium Body With 4 Windows Giving 360 Degree Light IP65 MR16Â Â Â Â Â Â Â
( Requires a 12v toroidal transformer )
The Waymarker 360 code number E8421L is a stylish 12v recessed light with 4 windows providing 360 degree lighting around the top plate. It is useful where
you want to cast a corona of light both across a path or drive edge as well as backwards onto planting, lawn or other areas
behind. The light is located by an O ring on the body into a sleeve tube so that no external screw fixings are visible.
It may also be used as a deck light.
| Colour/Finish: | Natural copper weathers to a mottled brown finish which blends well with red brick, bark mulch, gravel and timber, especially hardwood decking |
|---|---|
| IP Rating: | IP65 |
| Construction: | Top plate is attached to tubular aluminium body which unscrews into 2 halves without tools for easy lamp changing. 2m cable via rear entry cable |
| Input Voltage: | 12v |
| Lamp Type: | MR16Â LED lamp – 38 degree beam for wider staircases or 60 degree beam for wider coverage of a narrower staircase, path or patio. MR16 warm white LED. lamps include 3w or 5w for lighting across wider steps; up to 50,000 life and low energy consumption make them the best option |
| Installation: | The plastic sleeve is built into the wall during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. Suitable drainage should be provided below each fitting to prevent water logging. Waymarkers should not be installed in ground subject to water logging, an IP68 light such as a Neptune Recessed light should be considered. Connect input cable to cable from transformer using T9962 cable joint or T9963 cable splice kit. |
 Please be aware that copper will dull down with the elements of the weather and Patina effect will occur. NOT SUITABLE TO DRIVE OVER.
Installation 12v
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how
it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting
and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the
products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be
made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then
filled with a re-enterable liquid gel mix.Â































Reviews
There are no reviews yet.