Surge – 240v – Black – 50w IP65 Cool White 4000k 4000 Lumens – Floodlight

Surge – 240v – Black – 50w IP65 Cool White 4000k 4000 lumens – Floodlight

The Surge range consists of compact and budget friendly floodlights. This 50W version provides a high light output of 4000
lumens with a colour temperature of 4000K. It boasts an angled bracket to ensure easy installation and flexibility to suit
your lighting needs. IP65 rated to ensure protection against water. Various sizes & PIR versions are available. High powered LED flood light, built to last. Constructed from die cast aluminium alloy, allowing for superior cooling, and
available in matt black. With a high lumen output, the Surge is ideal for most commercial flood applications. Also available
as a 100W

• Matt black paint & clear glass
• Constructed from die cast aluminium alloy & glass
• 50W LED module (SMD 2835) Cool White (Included)
• K: 4000 Lm: 4000 Lm/W: 80
• IP65
• Proj: 36mm H: 237mm W: 200mm
• Class 1
• 2 Years Warranty
• Weight: 1 Kg

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife
can all be affected by light pollution. The warmer colour spectrum of 2,700 Kelvins does not interfere with insects
and general wildlife as much as the blue colour spectrum of light around 6,000 kelvins which can disrupt their normal night-time
activity. This also applies to bats where an anti-glare light fitting works better as well as reducing the overall light
pollution in the area. You must also be mindful of your neighbours and the effect your lighting can have on them and shining
a flood light into their windows at night will cause them distress. Try to keep the light in a downward position and local
to the area you want to illuminate and even if you want to illuminate tall trees it can be done in a sympathetic way by placing
a ground buried or surface spike flood light directly under the trees to illuminate the canopy. Some light fittings also
have an anti-glare shield fitted to reduce light pollution.

Lamp Colour (Kelvins)

Lamp colour is determined by the Kelvins and a lamp which is  2,700 kelvins  is classed as warm white and is sympathetic
to skin tones and warm brickwork. A lamp with a kelvin of 6500 is in the  cold blueish white spectrum and works well
against a white background and will appear brighter to the naked eye than the warmer colour spectrum.

Installation – See Instructions & Data Sheets Tab

All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products
section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore
fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation
as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68
inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible
should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate
drainage systems should be put in place especially in clay based soil.