Surge – 240v – Black – 10w IP65 Cool White 4000k 800 Lumens – Floodlight

The Surge range consists of compact and budget friendly floodlights. This 10W version provides a high light output of 800
lumens with a colour temperature of 4000K. It boasts an angled bracket to ensure easy installation and flexibility to suit
your lighting needs. IP65 rated to ensure protection against water. Various sizes & PIR versions are available.

• Matt black & clear glass
• Constructed from die cast aluminium alloy & glass
• 1M Cable
• 10W LED module (SMD 2835) Cool White (Included)
• K: 4000 Lm: 800 Lm/W: 80
• IP65
• Proj: 27mm H: 125mm W: 104mm
• Class 1
• 2+1YR Extended Warranty
• Weight: 0.3 Kg

Lamp Colour (Kelvins)

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins
which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting
the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives
a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in
offices or at fast food restaurants to make you feel less comfortable and relaxed and feel more alert. There’s nothing
that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant
to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme
in mind and make sure to buy the bulb with a colour temperature to match. 

Installation 

All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products section but
in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit
for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation
as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68
inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible
should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate
drainage systems should be put in place especially in clay based soil areas.