Starlight – 12v Hanging Light – Satin Silver – Anodised – (MR16) Plug & Play
The satin silver ‘Starlight’ is a contemporary 12v hanging light made from anodised aluminium, ideal for outhouses, sheltered
outdoor seating areas, pergolas and certain trees. Once dark, beautiful 360° lighting effects are created by the patterned
body of this decorative 12v garden light. The ‘Starlight’ hanging light looks smart in daylight too, a fantastic example
of ornamental landscape lighting. The satin silver anodised finish adds a modern touch to the light.
Choice of three colour finishes, Natural Copper, Anodised Satin Silver, Powder Coated Brown.
The ‘Starlight’ hanging down light can be used with an MR16 LED bulb which reduces running and maintenance costs due to its
long lifespan and low wattage. Should the LED MR16 ever need to be replaced, this can be done simply by unscrewing the
one screw at the top of the cylindrical body to remove then replace the bulb. Certain lighting design features make landscape
lighting installation easier; in the case of this hanging garden light, The fixed hanging ring at the top of the light
can be used with a length of chain if desired.
- Finish: Satin Silver – Anodised Aluminium
- Lamp: MR16 (see above for options)
- Max. Wattage: 35W
- IP Rating: IP23
- Cable: 12v 2 core Versa plug & Play with 2 pin male connector
- Dimensions: Length: 260mm (inc ring), Diam. (main body): 60mm, Diam. (top): 90mm
- Also available in Natural Copper or Brown Powder Coated Aluminium
Lamp Colour (Kelvins)
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins
which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum
Installation 12v
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how
it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting
and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the
products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be
made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then
filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and
reduced water ingress. Care must be
taken with the cable runs and not to install transformers more than 30 metres away from the furthest fitting to avoid
any voltage drop. Cabling should be 2 core Rubber HO5RN-F or HO7RN-F and not PVC. PVC leads to capillary action over
time especially with UV degradation. Always check the correct type of transformer you need for your fittings. We recommend
wiring in parallel with Toroidal AC and LED DC drivers. But when using Milliamp mA LED drivers, they should always be
wired in series. Plug and Play kits are simply a case of daisy chaining the fittings via plug and play junction boxes,
connectors and extension cables using a 2-pin plug arrangement. These Plug and Play fittings should only be used for
small domestic projects due to voltage drop over 5 metres.
Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.



























Reviews
There are no reviews yet.