Severus Landscape Direct IP65 3W Warm White Wall – Grey ABS Plastic 220- 240v

Severus landscape direct IP65 3W warm white wall – Grey ABS Plastic 220- 240v

• The
  clever design means that you can now fit guide lights when you are not
  able to cut holes in your wall. The slim profile and integrated driver
  allows us to keep the projection from the wall to a minimum and the IP
  rating is ensured by the gasket and the diffuser when it is fitted into
  place. The outer cover simply clips into place to complete the
  installation
• Complete with fixing accessories
• Grey abs plastic & frosted pc
• Constructed from abs plastic & polycarbonate
• Complete with integrated control gear
• 3W LED module (SMD 3014) Warm White (Included)
• K: 3000 Lm: 180 Lm/W: 60
• IP65
• Proj: 30mm H: 80mm W: 230mm
• Class 2
• 2 Years Warranty
• Weight: 0.312 Kg

Lamp colour ( Kelvins )

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how
it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting
and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the
products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be
made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then
filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and
reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially
in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Mains 240v cable
will have less joints than a low voltage installation but care must be taken with the cable runs. Cabling should be Rubber
Butyl and not PVC. PVC leads to capillary action over time especially with UV degradation.

All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with
Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.