Seina Guide IP44 2W Cool White Brick Light 316 Marine Grade Steel – 220 – 240v
Original price was: $45.40.$31.78Current price is: $31.78.
- Free and fast shipping worldwide
- Experience the Best Quality
- Online assistance, always at your service.
- Shop with confidence, we guarantee quality.
Seina guide IP44 2W cool white brick light 316 marine grade steel – 220 – 240v
a softer lighting glow and is ideal for lighting pathways. Also available in black.
- Manufactured from marine grade stainless steel
- Marine grade brushed stainless steel & frosted pc
- Constructed from marine grade stainless steel (316) & polycarbonate
- 2W LED module (SMD 2835) Cool White (Included)
- K: 4000 Lm: 100 Lm/W: 50
- IP44
- Proj: 2mm H: 85mm W: 225mm
- Class 2
- Cut hole: 215 x 65mm
- 2+1YR Extended Warranty
- Weight: 0.8 Kg
A guide to lighting steps
Lamp colour ( Kelvins )
The colour of a lamp is defined as a measurement called kelvins. A standard GLS incandescent bulb in the home would be
2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white
spectrum.
Installation 220 – 240v
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how
it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting
and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the
products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be
made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then
filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and
reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially
in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light. Mains 240v cable
will have less joints than a low voltage installation but care must be taken with the cable runs. Cabling should be Rubber
Butyl and not PVC. PVC leads to capillary action over time especially with UV degradation.
All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with
Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.
</
| Colour | Black, Silver |
|---|---|
| Bulb Type Bulb type used for fittings | Integral LED |
| Class | class 2 |
| Colour Colour of fitting | Silver |
| Height | 85mm |
| IP Rating Ingress Protection - a two digit code representing water resistance. | IP44 |
| Colour Temperature | 4000k |
| Lumens | 100 lm |
| Materials | Stainless Steel |
| Projection | 2mm |
| Voltage Voltage of fitting, Light Bulb or Transformer | 240v |
| Warranty | 2 Years |
| Watts | 2W |
| Width | 225mm |
Be the first to review “Seina Guide IP44 2W Cool White Brick Light 316 Marine Grade Steel – 220 – 240v”
Related products
LED Flood Lights
V-Tac Slimline LED Floodlight 10w 220- 240v 3000k Warm White Black Frame IP65 800 Lumens
LED Flood Lights
Salde Black Powder Coated Twin Adjustable 240v Spot Wall Light IP54 2 X 10w LED 3000K-4000K
LED Flood Lights
20w Smart Floodlight RGB+3in1 CCT Dimmable In Black Or White 240v
LED Flood Lights
V-Tac Slimline Photocell LED Floodlight 50w 220- 240v 3000k Warm White Black Frame IP65 5000 Lumens
Reviews
There are no reviews yet.