Regor LED 6 – 240v – White – 30w IP65 Cool White 5000k 3884 Lumens – Non Corrosive Floodlight

This high quality 30w LED floodlight is constructed from polycarbonate and stainless steel. Non-corrosive construction is ideal for coastal
areas.

FEATURES • Tough polycarbonate UV resistant housing • Tridonic constant current control gear • Integral photocell option
• Excellent passive thermal control • Non Corrosive construction • Stainless steel and polycarbonate • Suitable for coastal
areas. 3884 lumens with colour 5000k.  There is an additional charge for the 4000k or 3000k module due to the fact the fitting comes with 5000k as standard. The lumens for the 4000k are 3505 lumens (5% reduction) and for the 3000k are 3321 lumens(10% reduction).

  5 Year warranty. Made in the UK and delivery within 5 working days.

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife
can all be affected by light pollution. The warmer colour spectrum of 2,700 Kelvins does not interfere with insects
and general wildlife as much as the blue colour spectrum of light around 6,000 kelvins which can disrupt their normal night-time
activity. This also applies to bats where an anti-glare light fitting works better as well as reducing the overall light
pollution in the area. You must also be mindful of your neighbours and the effect your lighting can have on them and shining
a flood light into their windows at night will cause them distress. Try to keep the light in a downward position and local
to the area you want to illuminate and even if you want to illuminate tall trees it can be done in a sympathetic way by placing
a ground buried or surface spike flood light directly under the trees to illuminate the canopy. Some light fittings also
have an anti-glare shield fitted to reduce light pollution.

Lamp Colour (Kelvins) 

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins
which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. 

Installation 

All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products
section but in simple terms the IP rating is appropriate to each light fitting and its intended application and
is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good
as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can
be done using IP68 inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints
where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights
adequate drainage systems should be put in place especially in clay based soil areas