Sale!

Regen 5m IP65 55W Cool White LED Strip - Image 2

Regen 5m IP65 55W Cool White LED Strip

Original price was: $43.29.Current price is: $30.30.

SKU: ZXH0Z 1704328509 Categories: Outdoor LED Strip, Outdoor Lights

Free and fast shipping worldwide
Experience the Best Quality
Online assistance, always at your service.
Shop with confidence, we guarantee quality.

Regen 5m IP65 55W cool white LED Strip

The Regen is an IP65 rated, cool white LED flexible strip light, which is easy to install using the self adhesive backing.
It is an energy efficient but high lumen output range which offers an adaptable and flexible solution suitable for use indoors
or out; an ideal choice for setting mood within the bathroom or adding a touch of colour to outside decking. Recommended
to be used with our profile range. Available in warm white and accessories sold separately. Accessory kit sold separately.

White plastic & clear silicone
Constructed from polymer film & silicone rubber
Requires a LED driver
55W LED tape module (SMD 2835) Cool White (Included)
K: 4000 Lm: 5000 Lm/W: 91
L: 5000mm W: 10mm Proj: 2mm
Class 3

Position the LED driver next to the mains outlet socket that the system will connect to. Do not plug-in at this stage. Make
sure that the LED driver used can load the total power of the LED strip. • After deciding the layout of the LED strips, ensure
the cables are long enough to connect to the desired positions. The unit can be easily shortened to whole metre lengths. To shorten the tape to a specific length, then it can
be done in multiples of 100mm.•Cut to the desired length. The maximum permissible length
of 24V SMD LED’s for each driver is listed Ensure that the cut is made at the copper connection points. • Before connect
the Regen strip or the cable, must use the glue to connect, details refer to illustration in attached instructions. • Peel the backing tape off the
Regen strip. Apply moderate pressure to stick the LED’s to the surface. An assistant may be required to help stick longer
lengths accurately.

Connect the LED tape to the LED driver – ensuring You have correctly identified the wires. Rated constant input voltage when
a luminaire is operated from a constant voltage control gear not provided with the luminaire. Luminaires supplied
with constant current shall also be marked with the highest allowed U out value of the control gear.

Connect the power connector to the LED driver. • Ensure that all the connections are tight • Connect the power supply to
the mains and turn on.

Lamp Colour (Kelvins)

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700
kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum.

Class	Class 3
Colour Colour of fitting	White
IP Rating Ingress Protection - a two digit code representing water resistance.	IP65
Colour Temperature	4000k
Length	5000 mm
Lumens	5000 lm
Materials	Plastic
Projection	2mm
Warranty	2 Years
Watts	55W
Width	10mm