Pro Solar Guarda – Vandal Resistant Black Solar Bollard Light In Warm White Or Cool White LED

The Guarda Solar Path Light has vandal resistant design, made of durable die cast aluminium. Not only does it incorporate
a high impact, crystallised polycarbonate lens, but added aluminium struts further protect this from damage. This commercial
solar bollard has a 210mm diameter, with a substantial, base of 258mm diameter for surface mounting. This is the largest
base of all of our current solar models, and as a result, the most robust solar product. Mount this vandal resistant solar bollard to any flat surface, or alternatively, use J-Bolts to root mount into wet concrete.

At dusk, the Guarda solar light will illuminate at full brightness, and then follow a gradual dimming sequence until it
reaches 30% brightness after 5 hours. From then on it will remain at 30% until dawn. This time control sequence alongside
the substantial monocrystalline solar panel and replaceable LifePO4 lithium battery will result in the battery charge being
retained for longer. This is particularly effective during duller periods where constant full brightness solar lights would
exhaust the charge fairly quickly. The on/off switch is concealed by a waterproof plug / bung.

Both Warm White and Daylight White 1.8W Epistar LEDs generate a first-class output with over 100 lumens per watt.

The Guarda is an ideal vandal resistant solar bollard or solar driveway light, particularly in areas where the bollard is
more susceptible to malicious or accidental damage. It is both simple and safe to install, as well as versatile when
it comes to positioning, especially in comparison to mains fittings. Environmentally friendly Solar lighting converts
natural energy into electrical current, with the added benefit of it being completely free to run.

Both Warm White and Daylight White 1.8W Epistar LEDs generate a first-class output with over 100 lumens per watt. At dusk,
the Guarda solar light will illuminate at full brightness, and then follow a gradual dimming sequence until it reaches
30% brightness after 5 hours. From then on it will remain at 30% until dawn.

Epistar LED chips (1.8W) generate a high lumen output of 210 lumens with up to 50,000 hours life.