Power Trail-Lite Round – Outdoor Recessed Light – 12v 316 Stainless Steel 1.4w 3000k IP67 Fixed Up Light

Power Trail-Lite Round – 12v 316 Stainless Steel 1.4w 3000k 45 Lumens IP65 Fixed Spotlight – Choice Of 3000k or 4000K

The Power Trail-Lite round IP65 is an ideal step and brick light and has a hard wearing 316 stainless steel construction
and glass diffuser, it is built to last and perfect for those small spaces that just need a low level glow of light.  We
recommend that with all in ground installations that a good 200mm of shingle is put underneath for drainage especially in
clay based soils.

The depth of the fitting is 90mm. Cut out 40mm and diameter of bezel is 41mm.

The lumen  out put is 45 lumens and colour temperature is  3000k warm white.  The cool white option has 4000k
colour temperature and code number 10021089.

The fitting is 12v and will require a 12v 350mA (milliamp) transformer.  The product is developed in Germany and will take between 5 – 7 working days to arrive from Germany.

A budget fitting but very popular and good value for money.

The LED module can be replaced by the manufacturer or qualified service technician authorised
by them. 

Lamp Colour (Kelvins) 

The colour of a lamp is defined as a measurement called kelvins. A standard GLS incandescent bulb in the home would be 2,700
kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. 

12v Installation – See Instructions & Data Sheets Tab

Choosing the style of a product is only part of the equation you must also think of where that product will be used and
how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light
fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting
and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints
must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which
are then filled with a re-enterable liquid gel mix.   

                                           350mA drivers (transformers) must be wired in Series.