Navigator Eye,12v, 1w Led Step Light, Copper, 4000k Cool White, IP65

Navigator eye,12v, 1w led step light, coper, cool white, IP65

                                                                        
( Requires a 12v transformer )

E3421W LED is a low energy, high output white l.e.d. deck and recessed light which consumes a small amount of power and stays cool to the touch. The high output 1w white led produces a wide 800 beam diffused by the 28mm diameter frosted lens. Install it to light across individual steps or in a wall about 40cm above a patio or deck.

Exterior Low voltage light fittings are the ideal choice for outside lighting projects
as they are safe to run compared to a mains 240v supply. The installation of exterior
lighting is generally the weakest point and it is therefore imperative that the installer
has previous experience of installing the lighting system. All joints must be 100%
water tight and where possible keep all transformers above ground. Heat shrink kits
and resin filled boxes are available from our web site to complete a good waterproof
installation. It is equally important to allow for adequate drainage under each light
fitting especially if you are in a clay based soil area where water drainage could
be a problem. In these type of areas we recommend you have surface lights rather
than ones buried in the ground. Ensure that your installer is NIC EIC certified although
this does not mean they have done exterior lighting before.

MUST BE WIRED IN PARALLEL

please ensure the transformer has the correct loading.

Navigator lights can be arranged in custom layouts using cable joint
kits and 1.5mm cable, which is more flexible than kit-type products.
Connect to the end of a low voltage cable using T9962 cable joint kit;
for splicing into a run of cable use T9963 cable splice kit.