Monolite Step Light – Brass (Rustic Bronze) – Versa 12v Plug & Play Uses G4 Lamps
Original price was: $60.00.$42.00Current price is: $42.00.
- Free and fast shipping worldwide
- Experience the Best Quality
- Online assistance, always at your service.
- Shop with confidence, we guarantee quality.
Monolite Step Light – Brass (Rustic Bronze) – Versa 12v Plug & Play
The Solid Brass Monolite 12v Step Lights are smart 12v surface mount garden lights with a rustic bronze finish.
They’re ideal for low-level lighting either mounted on walls next to steps, or on the steps themselves. In fact these
versatile step lights will mount onto any flat surface such as sleepers or raised beds.
As solid weatherproof units, the Monolite step lights have a single cut-out that emits a slim arc of light. This design
results in all light shining evenly downwards, without glare. A mirrored reflector inside the enhances this light. The
Monolite step lights have a front and back part that fit together securely. Once the back plate and bulb are in place,
the front part simply ‘slots’ into place.
Use the bright 12 volt LED G4 bulbs in cool white, or warm white save more energy and have a longer life span than standard
halogen G4s. G4 LED bulbs will work from a normal Halogen 12v A/C transformer so there is no need to buy a special
LED “Driver”.
Monolite step lights are included in the VERSA Plug & Play Range. For ease of installation, a 2 pin adaptor at the
end of it’s cable will plug directly into a 12v plug and play versa Transformer, or any Versa connectors, requiring no wiring. If the
adaptor is not required then this can simply be cut off and the wire stripped to create a normal connection via a junction
box. VERSA Plug & Play connectors are also compatible with other plug and play systems such as Techmar.
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how
it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting
and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the
products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be
made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then
filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and
reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially
in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light. Care must be
taken with the cable runs and not to install transformers more than 30 metres away from the furthest fitting to avoid
any voltage drop. Cabling should be 2 core Rubber HO5RN-F or HO7RN-F and not PVC. PVC leads to capillary action over
time especially with UV degradation. Always check the correct type of transformer you need for your fittings. We recommend
wiring in parallel with Toroidal AC and LED DC drivers. But when using Milliamp mA LED drivers, they should always be
wired in series. Plug and Play kits are simply a case of daisy chaining the fittings via plug and play junction boxes,
connectors and extension cables using a 2-pin plug arrangement. These Plug and Play fittings should only be used for
small domestic projects due to voltage drop over 5 metres.
All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with
Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.
| Bulb Type Bulb type used for fittings | G4 |
|---|---|
| Cabling | 2 Core 0.75mm² H05RN-F Rubber Cable (1.5m) |
| Colour Colour of fitting | Brown |
| Guarantee | 2 Years, Reduced 1 year warranty period for cable |
| IP Rating Ingress Protection - a two digit code representing water resistance. | IP54 |
| Materials | Brass |
| Plug Type | VERSA – Plug & Play (2 pin) – male |
| Voltage Voltage of fitting, Light Bulb or Transformer | 12v |
| Watts | 30W |
Be the first to review “Monolite Step Light – Brass (Rustic Bronze) – Versa 12v Plug & Play Uses G4 Lamps”
Related products
LED Flood Lights
LED Flood Lights
LED Flood Lights
20w Smart Floodlight RGB+3in1 CCT Dimmable In Black Or White 240v
LED Flood Lights
LED Flood Lights
Salde Black Powder Coated Twin Adjustable 240v Spot Wall Light IP54 2 X 10w LED 3000K-4000K
Reviews
There are no reviews yet.