LED Spike – 100-240v – Aluminium Athracite Finish IP55 6w 3000k 400 Lumens Spike Spotlight Also In Green & Rust

Ground spike lights are the most popular and flexible light fittings we sell and can be used for numerous areas to
illuminate small trees and shrubs as well as garden ornaments and water features.  The spike can also be removed
and the attached bracket can be used to wall mount the spot light which can be directed at an eating area or BBQ.
You could fix them on the underside of the top of a pergola and send a pencil beam of light down to the floor to
illuminate the pathway below or back light a bench area, the possibilities are endless and they are a very easy and
cost effective solution to illuminate an outdoor space.

The warm white 3000k colour temperature works well illuminating a variety of shrubs, trees, features,  brickwork
and wood.

All installations should be done by a NIC EIC electrical contractor to ensure a safe and 100% water tight installation.
Waterproof joint kits and boxes are available from our web site. 

Lamp Colour (Kelvins) 

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be
2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white
spectrum

=”center”>

Installation 220 – 240v – See Instructions & Data Sheets Tab=”center”>

All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products section
but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore
fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as
the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this
can be done using IP68 inline connectors, waterproof junction boxes which are then filled with a resin or gel
mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing
ground buried lights adequate drainage systems should be put in place especially in clay based soil areas.