AlvaLED – Aluminium IP65 240v With 2 X 6w GU10 LED Units Twin Headed Spike Spotlight – Black / Silver / Cocoa

This 240v fitting is fitted with 2 x integral sealed 6w GU10 LED’s and comes supplied with 50cm of 3 core 0.75mm HO5RN-F cable
and a 4 fin aluminium anchor spike for more robust stability.  The pole length is 400mm x 25mm diameter
and the spike length is 165mm.  The twin adaptor length is 120mm. Head length is 135mm (fully extended)
and the Head diameter is 60mm.

The fitting not only comes in a choice of three colour finishes but also a choice of warm white 3000k LED colour temperature giving out 680 lumens per 6w LED bulb or 6500k Daylight cool white colour temperature giving out 750 lumens per 6w LED bulb.  The integral bulbs are sealed and cannot be replaced.  Approximate lamp life 20,000 hours.

Follow the instructions from the download tab above.  

Lamp Colour (Kelvins) 

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be
2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white
spectrum

Installation 220 – 240v – See Instructions & Data Sheets Tab=”center”>

All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products
section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore
fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation
as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68
inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible
should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate
drainage systems should be put in place especially in clay based soil areas. 

=”center”>