AlvaLED – 240v – Black Aluminium IP65 Max Wattage 20w Per Bulb GU10 Twin Headed Spike Spotlight – In 4 Colours

The AlvaLED Adjustable Twin Spike Light is a smart, modern garden spotlight. As well as this version with a GU10 bulb holder,
there is also a 240v in-built LED version and 12v MR16 option. Two adjustable spotlight heads attach to the twin adaptor
and will shine in almost any direction to create various visual lighting effects. Both spotlights in the same position
will generate a stronger, more concentrated beam. Position the heads at different angles to create dramatic up-lighting
in two directions. Each spotlight head is also adjustable over 180 degrees. The twin adaptor attaches to the substantial,
400mm pole of the same finish. This attaches to the 4 fin ground spike which provides extra stability with minimal movement
in soft ground. This is particularly beneficial for adding height in areas of high planting or exposed areas which require
a particularly sturdy mount.

As each fitting has a GU10 bulb holder, the choice of LED lamps one can use is good. Specifications such as lumen output,
wattage and colour temperature are interchangeable to create the desired effect.

Three different finishes of this Twin Spike Light are available to suit all decorative concepts. Classic black is a popular,
powder coated finish. This looks great in daylight and disappears in darkness. Both the titanium silver and cocoa copper
finishes are anodised aluminium, which are extremely weatherproof. The titanium colour is designed to look very similar
to contemporary stainless steel and the cocoa finish to copper. Although they look very similar and use high quality
anodised aluminium, they are a fraction of the price. We’ve also added Garden Green to the colour choice.

All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products section but
in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit
for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation
as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68
inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible
should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate
drainage systems should be put in place especially in clay based soil areas.