Ainos Microwave Sensor – Outdoor Wall Light – 240v White Polycarbonate LED 22w 3000k 1430 Lumens IP44

Ainos LED Microwave – 240v White Polycarbonate 22w 3000k 1430 Lumens IP44 Security Light – Choice Of 2 Colours

The Ainos LED Microwave Motion Sensor surface mounted fitting is a 22w bright Security amenity style light which is ideal
for ceiling or wall mounting in entrance areas.  It comes in a choice of anthracite powder coated aluminium
and polycarbonate code number 229975 or white powder coated aluminium and polycarbonate code number 229971.  These fittings
are equipped with Microwave sensors and the control gear is located inside the front of the fitting.  As per the illustration above
from the gallery of images.  Weighing just 1.56kg and measuring just 30cm with a depth of 6.5cm this powerful light
is an ideal fitting for the outside of your home and with the various settings available to this fitting making it very
versatile.

The LED module has an approximate life span of 25,000 hours and can be changed under warranty by the manufacturer or authorised service engineer in the event of lamp failure.

The Light Control has 5 settings which allows you to set the lux levels from 2 to 50 or disabled.  Settings
2 – 5 will enable the sensor to activate once those lux levels are met.  Setting 1 is the disabled setting,
Meaning the light will activate in daylight too.

There are 7 time setting functions. These can be from 5 seconds to 30 minutes.

Finally there are 5 detection adjustment settings from 10% to 100%. If wall mounted then at 10% brightness it will detect
up to 4metres and at 100% brightness it will detect up to 9 metres.  If ceiling mounted then at 10% brightness
it will detect up to 4 metres and at 100% brightness it will detect up to 7 metres.

=”center”>

Installation 220 – 240v – See Instructions & Data Sheets Tab=”center”>

       Please read the Installation steps completely before installation. Install the luminaire as shown in the information
and diagram supplied.

All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products
section but in simple terms the IP rating is appropriate to each light fitting and its intended application
and is therefore fit for purpose.